Have a broken button on your elbow rest? This 3D printed replacement is a direct replacement - no tools required.
Please note that this is a 3D printed part, not injection molded like the factory part. Therefore it will have minor cosmetic flaws on the surface. These minor flaws are not easily noticeable once installed.
Need to install a 105mm rear main seal into a 991 or a 997.2 Porsche 911? Make sure you set the seal to the proper 7mm depth from the surface of the crank flange! If you install the seal without a tool that controls the depth, you'll likely install it too deep, and you'll have a high risk of a leaking seal. It's simply too time consuming to do the job twice, so do it right the first time!
This is an affordable alternative to the costly (~$400) factory tool from Porsche. Simply bolt this tool to the crank using the flywheel bolts until the tool bottoms out on the crank. Remove the bolts, verify that your depth is even, and you're done!
This CAD designed tool is 3D printed plastic, and is safe to use on your seal without risk of damaging it or the bore that the seal sits in.
As a pad born to handle both club racing and enthusiast street driving, the RSL29 is optimized for fantastic pedal modulation and release characteristics without premature wear to disc or pad. Initial bite is also significantly improved over the OEM equipment. As a total package, this pad is bound to inspire more confidence behind the wheel on either end of street or track duty.
Product Details:
Compatible with iron rotors (not carbon ceramic)
Dual-duty, low friction pad for improved performance without premature wear
These cancellation kits are designed to be used with the Öhlins Road & Track series.
Our cancellation kits deactivate the factory-installed semi-active or adaptive damper system that adjusts the suspension systems electronically. They prevent error messages and warning lights from activating when you disconnect or disable the OEM electronic suspension system.
The kits are designed to integrate seamlessly with your vehicle’s existing electrical architecture, ensuring no disruptions to other system functions. We offer various configurations to match different vehicle makes and models.
Features
Designed for Öhlins' Road & Track series
Available in different configurations, tailor-made for each vehicle
Seamless integration with the vehicle’s electrical system
Includes brackets, screws, lock nuts, and other hardware necessary for installation
As a pad born to handle both club racing and enthusiast street driving, the RSL29 is optimized for fantastic pedal modulation and release characteristics without premature wear to disc or pad. Initial bite is also significantly improved over the OEM equipment. As a total package, this pad is bound to inspire more confidence behind the wheel on either end of street or track duty.
Product Details:
Compatible with iron rotors (not carbon ceramic)
Dual-duty, low friction pad for improved performance without premature wear
These are kept in stock at our warehouse in New Jersey and are ready to ship!
The 991.2 front spoiler evo ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.
This front spoiler with side wings adapts the factory front bumper and ads an element of visual appeal.
This item does not come painted and will need to be matched to your car.
Complete kit, with 3D-printed manifold assembly. Fits 991.2 3.0L and 3.8L engines.
***Please Note***
Due to production delays this product will take longer than normal to ship. Orders placed with this product will take an extended time to be fulfilled.
This larger turbo inlet elbow is strongly recommend for use with the M660, Pure 700, and M800 turbos. The factory inlet elbows are place an unnecessarily high restriction upon the inlet of the larger turbos, and they don't fit correctly to the inlet of the turbo, due to the larger, machined opening.
These inlets will allow the compressor inlet of the turbo to breathe properly.
Note: The original part was 3D printed aluminum. However, due to supply issues, the updated part is nylon.
Driving Modes - Each upgrade offers a host of improvements beyond power alone. Using Porsche’s Normal, Sport, and Sport Plus modes offers varying levels of output while retaining all of the unique characteristics present in each mode. Sport and Sport plus modes give you full power and torque. Normal mode give you modest increase over stock. Optionally quiet mode is available, which keeps the exhaust valves closed in Normal mode, unless driving rapidly. Optionally a “Low Torque” file can be requested that limits torque similarly to normal mode, but retains sport mode like peak power levels. We’ve optimized boost, fueling, ignition, cams, and more to achieve greater power and torque in all scenarios.
Features - In Sport Plus mode we’ve reduced turbo lag during reapplication of the throttle by building boost while off the throttle. We have linearized the pedal maps for a more predictable throttle response curve, which works exceptionally well on the track. We’ve enabled left foot braking, and brake boosting. The speed limiter has been removed. We’ve optimized the software to better handle larger wheels without excessive torque interventions. And finally we’ve inverted the start stop functionality so the vehicle starts with this feature disabled.
Safety - With many customers tracking their Porsche, safety is paramount in our calibration strategy. Through the use of extreme datalogging equipment and additional sensors, thermocouples, and transducers, our engineers were able to fully optimize the ECU for advanced safety routines. This includes implementing several routines not enabled from the factory. The entire thermal management system is optimized to reduce engine bay temperature, and reduce intake air temperature, while also implementing advanced protection routines to prevent oil temperature from achieving unsafe levels. The exhaust crackles disable when temperature thresholds are crossed, and are only enabled in sport mode. Next, we help protect the engine from LSPI by preventing the engine from being lugged out in tall gears. We also protect the turbo from damaging compressor surge, and add in turboshaft overspeed protection. We’ve enabled new temperature protection routines to prevent the engine, exhaust, and other components from overheating, and have implemented temperature management strategies that are fully mindful of the platform’s limited fueling capabilities. We’ve optimized the injection strategy to not only deliver a fatter torque curve and better spool, but to reduce the chances of knock, and torque dips. This is also achieved alongside per cylinder ignition advance and fuel trimming.
The APR Stage 1 ECU Upgrade is the first step towards making more power! This simple upgrade requires no engine hardware modifications, and produces 454-501 HP with 439-523 FT-LBS of torque, depending on octane. Gains as high as 102-155 HP and 111-195 FT-LBS of torque are available throughout the power band. To get more power, the vehicle can be outfitted with an upgraded intake, cooling, or exhaust system. Optionally manual transmission customers can request a lower torque file to help promote longevity on the factory clutch. Sport mode will have similar peak power, but torque will be capped similar to normal mode.
APR Stage 1 is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.
The APR Stage 3 GTS ECU Upgrade is the next step towards making more power! This simple upgrade only requires factory Porsche Carrera GTS turbos and no other engine hardware modifications, and produces 520-615 HP with 524-594 FT-LBS of torque, depending on octane. Gains as high as 152-228 HP and 196-266 FT-LBS of torque are available throughout the power band. To get more power, the vehicle can be outfitted with an upgraded intake, cooling, or exhaust system. With additional cooling we measured 565-648 HP with 548-594 FT-LBS of torque with gains as high as 185-262 HP with 220-266 FT-LBS of torque are available throughout the power band. Optionally manual transmission customers can request a lower torque file to help promote longevity on the factory clutch. Sport mode will have similar peak power, but torque will be capped similar to normal mode.
APR Stage 3 GTS is available for 91 AKI, 93 AKI, 100 AKI, 104 AKI, and E60-E85 fuel grades in North America, and 95 RON, 98 RON, 104 RON, 108 RON, and E60-E85 in the Rest of the World.
Please note, our E85 software is not a full flex fuel program. In this mode the engine is only designed to work on E85, as found directly at the pump, including both summer and winter blends from E60-E85. Using traditional pump fuels in this mode may result in engine damage. Do not manually blend with traditional pump fuel or race fuels or use race specific barrels of E85. To ensure proper E85 content levels, APR recommends using an E85 content sensor. Before using Ethanol, educate yourself and follow our switching guide.
AMS Performance Intercooler System for 991.2 Porsche 911 Carrera
The Alpha Performance Porsche 991.2 Intercooler System utilizes a pair of 120mm thick high volume cores, smooth cast aluminum end tanks, and organically shaped carbon fiber ducts giving you the best cooling upgrade on the market. Each high quality Garrett core provides optimum fin density for unmatched cooling.
AMS developed the Alpha Performance Porsche 991.2 Intercooler System to provide you the best cooling upgrade for your Porsche 991.2 Carrera. In bringing these intercoolers to market our goal was to provide the ultimate system in terms of quality, simplicity, fitment, aesthetic design, and performance.
AMS’ engineering team designed the Alpha 991.2 Intercooler end tanks with extremely smooth features and the perfect geometry for the best flow resulting in maximum horsepower. Designed using Solidworks 3D CAD software, these end tanks have improved flow over boxy sheet metal end tanks found on other intercoolers. They then took it one step further. AMS Engineers designed the organically shaped carbon fiber ducting to make use of every millimeter of available space for the ultimate power producing charge of cool air. The organic carbon fiber lower ducts allow the heat to transfer to atmosphere instead of soaking into the intercoolers.
Cooler Intake Charge Boosts Power And Response
Channeling cool air to the intercoolers is vital for optimum performance of any intercooler. Some manufacturers choose to remove the factory intercooler inlets in order to cut costs. This greatly reduces the effectiveness of ANY intercooler whether it’s larger or not. Others require that you cut up and tape the factory shrouding to the intercooler core in an attempt to seal the shroud to the intercooler core. While this is better than removing the shroud, it is still not the most effective way to boost performance. The Alpha Performance Intercooler kit requires no drilling and no cutting.
The Alpha 991.2 Intercooler System retains full use of the stock intercooler inlets forcing cool air into our larger, carbon fiber shrouds. Not only is this option more aesthetically pleasing, each rigid OEM-quality carbon fiber piece is made to seamlessly mate to the Alpha Intercoolers feeding them cooler ambient air more efficiently than the alternatives. Not to mention, eliminating the removal or destruction of your intercooler ducting. Included with the kit are velcro Alpha branded “speed straps” that hold the lower duct securely to the upper duct that will not deteriorate over time.
Maximum Airflow For Maximum Horsepower And Torque
Perhaps the best feature about this intercooler system is that it maintains cooling efficiency as more Alpha Performance power producing upgrades are developed for your Porsche 991.2. It improves the effectiveness of your other upgrades giving you maximum hp output potential.
Features
Highest quality intercoolers on the market.
Smooth cast end tank design reduces turbulence.
Optimum fin density of 20 fins per inch for improved cooling.
CAD design achieves perfect fitment and provides the most potential for power.
Carbon fiber intercooler shrouds and our foam tape form a tight seal to maximize cooling efficiency.
A simple installation without having to perform unsightly modifications.
High quality materials to last the lifetime of your 991.2.
Provides a factory fit & finish unmatched in the automotive aftermarket industry.
Kit Contents
120mm thick Alpha Intercoolers w/ cast aluminum end tanks
The highest quality carbon fiber intercooler shrouds
Bilstein B16 (DampTronic) suspension kits feature ride height adjustability with dampers compatible with OE electronic damping systems. All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of this kit. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (DampTronic) suspension kits are made in Germany and feature technology tested on the famed Nürburgring.
The APR GTS K04.3 Turbocharger System converts your 991.2 911 3.0T to the larger factory GTS turbochargers and includes our Stage 3 ECU Upgrade making the conversion plug-and-play! Up-to 615 HP and 549 FT-LBS of torque is available with no other modifications. Adding upgraded intercoolers bumps power up to 648 HP. This is a substantial increase in power and torque. Expect up to an additional +263 HP and +266 FT-LBS over stock on the base engine, and +244 HP and +223 FT-LBS on the S engine! This conversion system, sometimes dubbed an x51 package by Porsche, includes all genuine parts. It includes two new and genuine Borg Warner K04.3 Turbochargers, new gaskets, and o-rings. Simply remove and replace the factory components with our new components. No other hardware upgrades are required as the 3.0T mostly shares the same components, except for the turbochargers, from the base model to the GTS model. This system works with your factory engine hardware, factory fueling, and factory emissions components. It even works with upgraded engine and exhaust components and picks up even more power with upgraded intercoolers! This is all made possible by the included world-class APR Stage 3 ECU Upgrade which is programmed to your factory ECU at no additional charge!
Features:
Massive power and torque increase eclipsing GTS model power figures
Direct, bolt-on turbocharger upgrade using genuine and OEM parts
APR’s world-class Stage 3 ECU Upgrade included
Compatible with all factory hardware, including all emissions and fueling
These turbos by Tial are a bolt-on upgrade replacement for the factory turbos. Capable of 650-770whp. These are an upgrade for all of the 991.2 3.0L turbo motors including the Carrera, Carrera T, Carrera S, and Carrera GTS.
47/65mm 5/5-blade compressor, K04 compressor housing. 52/46mm, 5/5-blade UHF turbine. 0.45cm2 turbine housing A/R. This is our 65LTE compressor, rated at 45lb/min
These are brand new turbochargers and do not require your cores to be sent in.
You will receive a refund for your cores of $2000 for a functioning K03 Turbo (from a Carrera/T/S) or $2600 for a functioning K04 Turbo (from a GTS).
