Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
884006P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
StopTech Stainless Steel Braided Brake Lines provide a quicker; firmer; more consistent pedal response by maintaining consistent brake pressure. Additionally; stainless steel lines provide precision brake modulation; especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age. A variety of end fittings are available to meet application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
CFM Performance now makes it easy to vent the crankcase on your 2008-2015 EVOLUTION X 10 & 2009-2015 RALLIART with our new billet valve cover baffled breather kit. This kit is a direct replacement for your factory oil fill cap and allows unwanted crankcase pressure to exit.
This breather is the ONLY one in the market which incorporates a check ball to keep unmetered air from coming through while the crankcase is under vacuum. In other words, this breather acts just like a factory oil cap under normal driving conditions and when you get into boost it will release any crankcase pressure present. The proprietary internal baffle substantially reduces oil particle travel without affecting air flow. The filter element is washable and has a variety of top finishes for great looks. The pre-oiled cotton fiber traps dirt particles without restricting air flow. Although this kit was designed for use in racing applications, it works and looks great in any engine compartment.
884007P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
StopTech Stainless Steel Braided Brake Lines provide a quicker; firmer; more consistent pedal response by maintaining consistent brake pressure. Additionally; stainless steel lines provide precision brake modulation; especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age. A variety of end fittings are available to meet application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
This kit Includes the Following: Pump Holder, Flexible Hose, Filter & Set Screws to hold pump in place.
6061 Billet Fuel Pump Holder to accept Walbro fuel pumps along with Aeromotive, Deatschwerks, and FullBlown fuel Pumps. This kit is designed for the use of E-85 as well as pump gas.
High flow compressor outlet pipe for Evo X turbo. 2 bolt flanged, progressive tapered and larger diameter. Lightweight aluminum. Contoured machined outlet flange for smooth flow and o-ring flange face eliminates leaks and the 2 bolt gasket for proper seal. Immediately tapers from stock 1.75" diameter to 2.5" diameter and overall discharge area is increased by 100%. Don't upgrade your upper intercooler piping without eliminating this bottleneck out of the turbo! All aluminum, TIG welded construction and wrinkle black powdercoated finish.
Unique Easy fit Car Cover has a 4-layer non-woven polypropylene construction that blocks harmful paint contaminants. With a rugged Spun Bond outer layer attached to two melt blown middle layers of added protection and joined with a softer inner layer to produce a water resistant fabric that protects vehicle finish from the elements while maintaining breath-ability to avoid temperature and moisture build-up under the cover.
Our bench flashing service can restore your bricked ECU or apply one of our canned tunes to get you going with your mods. If you're local we can remove the ECU for you if you prefer or you can mail it in and have it mailed back ASAP.
Have a bricked ECU? Don't have access to a Tactrix cable, but need a tune flashed? Need to downgrade your ECU to a different year or go from MR to GSR after a 5 speed swap? Well we have a solution for you! With our bench flashing service we can recover your bricked ECU and/or flash one of our canned tunes during the process. Now you don't have to panic when things go wrong or you cut corners and let your buddy give you a "custom tune."
Do you have a dual pump setup in your Evo X and wish you had a good way of triggering the secondary pump? Traditionally, people have used a hobbs switch for this purpose, and while it works, they can be unreliable and a bit clunky. It will often require another bung welded into the intercooler piping, extra wires and hoses running through the engine bay, and it's just not as tidy as most people would like it to be.
We teamed up with ripnet and came up with a great new solution. This kit allows tuners to trigger a secondary fuel pump based on load using ECUFlash. The kit includes a plug and play connector and a software patch for your ECUFlash ROM.
Requirements:
Must use a supported ROM ID. The supported IDs are listed below.
The car must run a 3 port boost control solenoid connected to the brown connector.
The factory 2-port solenoid which uses the black connector must be unplugged.
The car must be an Evo X, this specific kit will not work on a Ralliart
A secondary fuel pump must be installed and wired up with a relay. The secondary pump should not automatically run when the car is started.
Here's how it works:
Plug the provided cable into the black connector which was originally connected to the black 2-port boost control solenoid.
Run the wires through the car to the relay which controls the secondary fuel pump.
Connect the blue wire to 86 on the relay and the red wire to 85.
Go to this website and generate a license key with the coupon code that you were provided. Note that this will require your VIN number.
Open the downloaded file in a text editor such as notepad.
Select all of text in the file by pressing CTRL+A, and copy it by pressing CTRL+C
In a text editor, open the XML file that matches your ROMID in following folder (note: this may require Administrator permissions on your PC): "C:\Program Files (x86)\OpenECU\ECUFlash\rommetadata\mitsubishi\evo"
Before the "</rom>" closing tag in the end of the file, paste the text from the downloaded file by pressing CTRL+V
Save the file. If the file won't save, be sure your have Administrator rights to that folder.
Launch ECUFlash and open your ROM file.
Scroll down until you see "Secondary Fuel Pump"
Open "Secondary Fuel Pump - Data", and press the "+" sign to make it say "Data Present".
Open "Secondary Fuel Pump - Function Call", and press the "+" sign to make it say "Data Present".
Open " Secondary Fuel Pump - License Key" and enter the License Key that you generated.
(Optional) Open "Secondary Fuel Pump - Intercooler Sprayer Enabled" and use the "+" and "-" keys to toggle whether or not you want that feature enabled. This will trigger the intercooler sprayer light on your dashboard to turn on when the secondary pump is being fired.
Open "Secondary Fuel Pump - Load vs RPM" - Set the load points for when you would like the secondary pump enabled at various RPMs.
Open "Secondary Fuel Pump - Load Hysteresis" to edit the hysteresis of the trigger.
Currently Supported ROM IDs:
52680022 (GSR 08-09)
56890013 (GSR 2011)
59580004 (GSR 13/15/FE)
Note: These will work with the Tephramod v1-3 versions of these ROMs (i.e. replacing the third to last number from 0 to 1, 2 or 3). For example, the Tephramod v3 ROM ID 52680322 will work the same as the standard ROM 52680022.
Fully synthetic LIQUI MOLY specialty with a unique additive technology. The powerful MFC (Molecular Friction Control) technology prevents formation of deposits while simultaneously reducing frictional losses. The synergetic effect provides optimum wear protection even under tough operating conditions. Improved fuel consumption and increased engine life are some of the end results. The oils fluorescent green color is typical for the MFC formulation.